l version="1.0" encoding="UTF-8" ?>Builder"s Calculator Tutorial

Here"s a an easy one so you can get used to just how this works. You get in a worth on the left and also click the "Convert To" button.

You are watching: 11/16 divided by 2

Inches: Feet: Inches:

If you gotten in 63, it should show 5 feet and also 3 inches.

The calculators room specifically designed for home builders using plain measuring tapes. All dimensions are based upon 1/16th of one inch.

Fraction: /24816 Decimal:

When you enter a portion there is constantly a field to form a number (filled in as "7" above, the numerator, or top number) and a popup with selections 2, 4, 8, and 16 (the denominator or bottom number). 16 is constantly selected as the default. If you enter 7/16, it shouldconvert come 0.4375.

You can get in fractions like 1/2 by beginning 1 in the field and also selecting 2 from the popup, or youcan go into it together 8/16. Both means work fine.

It"s also okay to go into improper fractions into any fraction box. You can get in 24/16 in the box aboveand that will convert to 1.5.

These calculators constantly approximate to advantageous measurements for a tape measure.

Decimal: Fraction: /

If you usage the example of .333 above it will convert to 5/16, i beg your pardon is the closest approximationon the 16ths scale (5/16 = 0.3125).

You will usage the foot/inch/fraction an approach of entering worths all the time. The looks favor this:

" and /24816" Inches:

You enter feet into the first box, inches into the second, and the the numerator and also denominator, choose you go before. In this example, it"s preset come 2 feet, 1 3/4", i m sorry should convert to 25.75.

You don"t actually have actually to enter feet and also inches. Friend can enter 0" and any variety of inches into any of these boxes.

" and also /24816" Inches:

In this example 32 1/8" will convert to 32.125.

You don"t also need to usage the fraction. Girlfriend can enter decimal numbers because that feet and inches.

" and also /24816" Inches:

For this calculator this isn"t an extremely useful but in few of the more facility calculators it deserve to come in handy. If you enter a non-integer into the inches ar the numerator and also denominator fields will it is in ignored.Also this only works because that feet and inches. The numerator should be an integer.

And there"s the turning back version:

Inches: " /"

128.125" is 10"-8 1/8"

Here"s whereby we obtain to the fun stuff. This looks yes, really complicated, yet it"s not that bad.

Add: " and /24816" + " and /24816" " /"

In this example, you"d adding 1"-3 1/2" and 7 9/16". Fight the = button and also it should screen 1"-11 1/16"!

And remember, you can skip the feet, get in decimals in the feet and also inch fields, and also improper fractions space okay.

The multiplication and division calculators must be reasonably obvious through now:

Divide: " and /24816" ÷ " /"

In this example separating 36 3/4" through 3 outcomes in 1"-0 1/4" (12 1/4"). The element you main point or divide by have the right to be a decimal number, too.

Angle calculator. This is the most complex one, however it"s very powerful.

A: " and also /24816" ("run")

B: " and also /24816" ("rise")

C: " and also /24816" ("hypotenuse")

Angle: °

The idea is the you get in two piece of info that friend know and also it willfigure the end the various other two.

Say you have a 4/12 key roof. Go into A=12" and B=4" and kit the calculation button. It must come ago with C=1"-0 5/8" which is the distance throughout the surface of her roof. And also the edge is 18.43°.

Make certain you hit the clear button prior to reusing the calculator.

See more: Solved Which Of The Following Is Not A Diagnostic Feature Of The Chordata? ?

If you go into A=3" and B=4" it should come ago with C=5" and also Angle=53.13°.

Say I have actually a slope. I"ve measured that I have actually a 96" run and a 78" rise. What"s the angle?

A: " and /24816" ("run")

B: " and /24816" ("rise")

C: " and also /24816" ("hypotenuse")

Angle: °

39°

Furthermore, I have actually a piece that I want to crossing it. It"s a 2x6 (1 1/2" x 5 1/2").How much from the edge do I have to measure back to make my cut?