You are watching: Toyota ignition lock cylinder removal without key
Required devices to eliminate Ignition Lock Cylinder without KeyTo efficiently remove the ignition lock cylinder there is no a key, girlfriend will require to have actually the following crucial tools. Every one of these tools are easily accessible on Amazon. You have the right to order castle now.Drill bitPower drillFlathead screw driverStep 1: Disconnect The BatteryThe first thing you should do is to disconnect her battery. This will ensure that you don’t get electrocuted or quick anything in the car.Remove an unfavorable cable terminal come disconnect the battery. Through the an adverse terminal removed, you will be for sure to work on her car.Step 2: remove The Steering WheelThe next thing you will should do is to eliminate the steering wheel indigenous its place so that you can access the ignition lock cylinder.Remove the screws to remove the lower and also upper cover indigenous the steering wheel column.After you have actually removed the covers, background the wheel up – traction at the facility cover. Disconnect the horn wires.Retain the washers and nuts as you eliminate the steering wheel.Finally, pull the steering wheel native its shaft.Step 3: eliminate Indicator and also Wipers SwitchesLocate these 2 switches and pull them far from their place.Step 4: eliminate Sleeves native Steering ColumnIn the steering wheel column, girlfriend will discover spacer columns. Locate and slide it up after you have actually removed the indicator and also wiper switches.Step 5: Disconnect every Electrical connection Leading to Ignition SwitchLocate the mounting screws on the ignition switch. Unscrew them and pull the ignition switch out.Carefully disconnect wires native the connector ~ above the rear side of the ignition switch.To pull the switch out, girlfriend will must loosen the tabs and also pull them out.Step 6: remove The Mounting BoltsGet a socket wrench or driver to unscrew the mounting screws or bolts top top the ignition switch. Unbolt the switch assembly and also housing that includes the lock cylinder.Most the the auto models have actually an interchangeable interchangeable lock cylinder. This cylinders can quickly be gotten rid of by inserting a pin right into a pinhole using the relax mechanism. Alternatively, you can turn one ignition key in the equipment position.Step 7: check The Mounting Bolts ~ above The Ignition move HousingSome automobile models have safety snap-off bolt heads. The main role of this component is to prevent thieves from instead of your deserve to ignition lock and also driving it turn off without a key.So, in this case, friend will require a power-drill through extractors to eliminate the bolts that mount the ignition switch to the steering column.Step 8: Lock the an essential CylinderInsert a straightened paperclip right into the slot and also turn come the left. This will lock the cylinder and also prevent the ignition from starting.
See more: Where Is Rock Smash In Pokemon X / Y? Where Do You Get Rock Smash In X And Y
Step 9: usage A ScrewdriverInsert the screwdriver into the cylinder and also turn that on the best as much as friend can.After that, pull the paperclip top top the far right as lot as possible. Tenderness slide the switch out of that is place.