The oil sending unit top top the 2000 Ford F-150 relays the oil push from the engine to the oil push gauge ~ above the dash. The oil sending unit is among the most important components on the engine. The oil is pumped up from the oil pan by the oil pump and also through the engine. While the oil is circulating v the engine, the oil passes through the oil sending unit. The oil sending out unit climate tells the oil gauge the specific oil pressure. As soon as the oil sending unit stops working, friend will must replace it as shortly as possible.

You are watching: Ford 5.4 oil pressure sending unit location

Jack the former of the van up and place jack stands under the prior axle. Make sure that the jack stands room evenly and also securely under the prior axle. Lower the van onto the axle.

Remove the driver"s side front tire. Rotate the lug nuts counterclockwise come loosen and also remove the lug nuts. Traction the tire off and set it come the side.

Locate the oil sending out unit top top the driver"s side of the engine. The oil sending out unit ~ above the 2000 Ford F150 is situated underneath the oil filter. The oil sending unit will certainly be screwed into the oil filter housing. Eliminate the wiring insert indigenous the bottom that the oil sending unit. Press in top top the plastic wire connector and pull the wiring connector out of the bottom that the oil sending unit. Placed an open finish wrench about the head the the oil sending out unit close to the threads and also loosen the unit by turning it counterclockwise. When the oil sending out unit is loose, you can remove the by unscrewing it with your fingers. Ar a tiny catch pan under the oil sending unit come retrieve any kind of excess oil.

Wrap Teflon tape about the threads of the oil sending out unit. Be sure to pave the Teflon ice cream counterclockwise about the subject or the tape will certainly come off as soon as you screw the oil sending unit earlier into the filter housing.

Screw the oil sending unit ago into the oil filter housing. Revolve the sending out unit clockwise to tighten. Do not overtighten the sending out unit or it could break off. Plug the wiring connector back into the bottom of the oil sending unit.

Crank the engine come make sure that the oil sending unit is working properly and that there room no leaks. Then rotate the engine off.

See more: How Long Is Ham Good For After The Sell By Date S Guidelines

Jack Jack stand Lug wrench Open finish wrenches small catch pan Teflon tape instead of oil sending unit
Make certain that the engine has cooled off before removing the oil sending out unit. The oil sending unit deserve to get an extremely hot and also burn your hands.

Grace Mclain has actually been composing professionally due to the fact that 1998. Her posts have appeared on, and LIVESTRONG.COM, and also she specializes in automotive and also business topics. McIain has a experienced writing certificate native JB hunting in tiny Rock, Ark.